Network RTK Solutions Simulator
Simulation Control Panel
Network Settings
Simulation Parameters
Real-time Data
Network RTK Solutions
Understanding Network RTK
Network RTK (Real-Time Kinematic) is an advanced GNSS positioning technique that utilizes a network of permanent reference stations to provide real-time corrections to rovers in the field. This technology enables high-precision surveying without the need for a dedicated base station setup.
Key Benefits:
- Increased efficiency - no base station setup required
- Consistent accuracy across large areas
- Reduced equipment costs
- Real-time centimeter-level accuracy
VRS Networks
Virtual Reference Station networks create a synthetic base station near your location for optimal performance.
- Automated base selection
- Optimized correction data
- Reduced distance-dependent errors
MAC Networks
Master-Auxiliary Concept networks provide raw observation data from multiple reference stations.
- Advanced error modeling
- Full network information
- Enhanced reliability
Network Connection Guide
Network Subscription
Sign up for a subscription with your local RTK network provider. Common providers include:
- • SmartNet
- • TopNET live
- • RTKNet
Configure Rover Settings
Enter network credentials and connection parameters in your rover:
- • Network URL/IP
- • Port number
- • Username/password
- • Mount point selection
Connection Test
Verify network connectivity and solution quality:
- • Check signal strength
- • Monitor solution type (Fixed/Float)
- • Verify correction latency
- • Check position quality indicators
Best Practices for Network RTK
Field Operations
- Check cellular coverage before starting
- Monitor solution status continuously
- Maintain clear sky view
- Re-initialize when changing locations
Quality Control
- Check on known control points
- Verify correction stream status
- Monitor DOP values
- Record quality metadata
Common Issues and Solutions
Unable to Connect
- • Verify cellular signal strength
- • Check network credentials
- • Confirm subscription status
- • Try alternate mount points
Poor Solution Quality
- • Check satellite visibility
- • Verify correction latency
- • Monitor network status
- • Re-initialize solution
Need help with Network RTK setup?