GNSS Base & Rover Configuration Guide
Base & Rover Setup Diagram
Simulation Controls
Base Station Setup
-
1
Select Known Point
Choose a control point or monument with known coordinates for base setup.
-
2
Level & Center
Ensure precise leveling and centering over the control point.
-
3
Radio Configuration
Set up radio parameters including channel and transmission power.
Rover Configuration
-
1
Radio Settings
Match radio settings with base station configuration.
-
2
RTK Profile
Configure RTK profile including correction format and timeout settings.
-
3
Verification
Check RTK fixed solution and connection status.
Common Issues & Solutions
No Radio Communication
- Verify radio channel settings match
- Check antenna connections
- Ensure clear line of sight
Poor Position Quality
- Check PDOP values
- Verify base coordinates
- Monitor satellite coverage